CUBOO - Heater Pro V2 - Induction Heater for DynaVap and more

CUBOO - Heater Pro V2

The improved induction heater comes with a display, new electronics, adjustable timer, adjustable heating range, and replaceable inner glass part. A lot of experimenting went on behind the scenes, and we are confident that the new heater can meet even the toughest demands!

The new Cuboo Heater is powered by two replaceable 18650 Li-Io batteries, which makes it sustainable and ensures a long lifespan.

The Power Mode

In Power Mode, you can adjust the heating power from 30 to 60 watts (70 watts in Boost Mode). Here, you should definitely pay attention to the click of your Dynavap. The timer starts immediately after inserting the Dynavap. After 10-60 seconds (depending on the setting), the induction heater stops heating for safety reasons and displays "Time out". The display is only unlocked by pressing the small button.

The Display

On the display, you can see the wattage, the timer, and the battery status of each cell.

The Power

The Cuboo Induction Heater Pro V2 is powered by two 18650 Li-Io batteries. This means the batteries are not permanently installed and can be changed at any time or charged with an external charger. Of course, you can also charge the batteries in the device via the USB-C port. Here, the charging current is limited to one ampere per cell (5V 2A).

We recommend a USB 3.0 Quickcharger. The batteries last for approx. 30 clicks or heating cycles (this depends on factors such as ambient temperature, temperature of the cap and vape, type of cap, heating cycle length, settings, etc.). If the battery capacity decreases, the display may show lower wattages than set, as the maximum power is no longer available.

Weight: 277 grams

Dimensions: 110 x 63 x 23mm

Scope of delivery:

• Cuboo Induction Heater Pro V2 (Black)
• USB-C charging cable
• Small spare ceramic screw to further adjust the heating chamber height
• Metal rod to easily adjust the screw
• Instructions in German